WRC Stains • RAC Stains • Sealers • Cleaners • Color Bible

Exterior Sealers

CR-550 Outside Acrylic 580voc
CR-560 Outside Acrylic 400voc
CR-570 Outside Acrylic 100voc
High quality clear, 25% solids, solvent based acrylic designed for sealing decorative concrete projects. Outside Acrylic is a hard acrylic polymer that produces coatings with excellent gloss, stain-resistance and are easy to clean. Adhesion to properly prepared concrete surfaces is excellent and the material is non-yellowing. (For Exterior Use Only) Outside Acrylic comes in three variations to assure compliance with local, state, and federal Volatile Organic Compound regulations.
• Gloss Level–Medium to High
• Recommended for Residential, Commercial and Retail Exterior Concrete.
• Consider using a Non-Skid Additive when applying Sealer to Exterior Projects.

Interior Sealers

CR-510 Inside Acrylic
CR-510 Inside Acrylic is a low odor non-toxic water-reducible acrylic emulsion. It is based on a hard polymer with ultra-small particle size that gives the coating excellent substrate penetration and gloss. The material has excellent UV stability and will not chalk or yellow. It is strongly recommended that Inside Acrylic be top coated with CR-520 Inside Floor Finish.

• Gloss Level – Low to Medium
• Recommended for Residential Interior Floors

CR-520 Inside Floor Finish
CR-520 Inside Floor Finish is a high gloss long lasting and renewable maintenance coat for interior decorative concrete floors.It dries quickly and is easy to apply, making it ideal for commercial venues with high traffic and limited time for refreshing floors. (Must be applied over the top of a cured sealer.)

• Gloss Level – Medium to High
• Recommended for Protecting CR-510 on Light to Medium Duty Commercial / Retail Floors

CR-530 Inside Epoxy
CR-530 Inside Epoxy is a two component 100% solids resin system used as a low, medium or
high build coating. Inside Epoxy provides an outstanding balance of strength, flexibility, chemical resistance, and clarity.
Inside Epoxy can be used as a primer coat for CR-540 Inside Urethane or as a stand alone coating on floors with minimal UV exposure. As a stand alone coating Inside Epoxy is not recommended for food processing areas, commercial kitchens, wineries or other areas that receive constant corrosive exposure.
• Gloss Level – High
• Recommended for Commercial and Industrial Interior Floors

CR-540 Inside Urethane
CR-540 Inside Urethane is a high solids, two component, water-based aliphatic polyurethane. It provides performance properties equal to conventional solvent based urethanes without the associated health and environmental problems. Inside Urethane is a hard, fast curing coating with good gloss, superior abrasion resistance and is easy to clean. Resistance to yellowing from UV light is excellent. Typical areas of application would include clean rooms, hospitals, concrete counter tops and high traffic retail areas. Inside Urethane is also suitable for aircraft hangars, automotive repair facilities and garage floors. (Requires a primer coat of CR-530 Inside Epoxy)
• Gloss Level – High
• Recommended for Commercial and Industrial Interior Floors