Projects using - Concrete-Resurrection

Concrete Resurrection™ Projects

Decorative Concrete that used Concrete Resurrections Stains

Engraved Concrete Designs The Loon is done with Concrete Resurrection stain (black and white) and we mixed some blue with the brown in the circle to make and interesting effect. We will put one more coat of sealer on the entire floor when construction is complete and finish with two coats of wax. Thanks for all of your help! John R. Cushman President Engraved Concrete Designs LLC

Concrete Illusions 1. We started with a 1500 sq. ft. basment, washed and dried. 2. We then stained the floor with Concrete Resurrections and HVLP guns using Fossil Wood (CR-717) as a base in a very random fashion spraying down a light mist of distilled water from a back pack sprayer. After this color dried we sprayed the Mocha (CR-718) color out with the HVLP guns to create a veining pattern, also spraying a small amount of distilled water from a backpack sprayer. When this color was dry we mixed the Fossil Wood with the Mocha to get an in between color and filled in the crotch areas of the veining lightly with this color. The end result (Pictured right). 3. Once dry we put one coat of waterbased sealer over it to protect during the engraving stage. We engraved the entire surface into a river rock pattern using the KaliedoCrete tools. It gets dusty: 4. 5. 6. Once done the floor was cleaned very throughly and sealed with 2 more coats of waterbased sealer using an 18" roller. The end results (pictured above). We have used Concrete resurrections on many projects and have been very pleased with the results. Joe Glogowski